降低气体悬浮焙烧炉焙烧过程中Al_2O_3粒度破损的措施

为了降低气体悬浮焙烧炉焙烧过程中Al_2O_3粒度的破损,对气体悬浮焙烧炉焙烧过程中氧化铝粒度的影响因素进行了分析,提出了降低粒度破损的一些措施。     

Quality assurance

BACKGROUND: The treatment of pediatric empyemas remains controversial. While thoracentesis and tube thoracostomy appear adequate for relatively benign organisms, virulent bacteria cause thick fibrinous pleural peels entrapping the lung. Open thoracotomies have been effectively used for decortication but are painful. METHODS: We report the use of minimally invasive thoracoscopic decortication in 12 patients (mean age 5 years). All failed conventional management with persistent fever, increasing oxygen requirement, recurrent effusion, and pleural consolidation; 5- and 10-mm trocars were used and complete decortication was accomplished. RESULTS: Ten of 12 patients were afebrile by 72 h and discharged 4-12 days after surgery. Eleven of 12 patients had clear chest x-rays by 1 month. CONCLUSION: Thoracoscopic decortication is a safe and effective means of treating pediatric empyemas.     

扭杆弹簧的波动传递特性分析

建立了扭杆弹簧的波动方程，提出求解扭杆弹簧传递特性的方法，并推导出弹性波在扭杆弹簧中的传递速度，对沿弹簧传播的位移、速度、应力、应变和作用力的传递特性进行了探讨。分析了扭杆弹簧弹性单波的求解方法及波动干涉问题。推导了弹簧的波阻公式，为扭杆弹簧的波动理论建模及实际应用提供参考。     

Microstructure and Mechanical Properties of Heat-treated GeSb_2Te_4 Thin Films

The effect of annealing on microstructure,adhesive and frictional properties of GeSb 2 Te 4 films were experimentally studied.The GeSb 2 Te 4 films were prepared by radio frequency(RF)magnetron sputtering,and annealed at 200℃and 340℃under vacuum circumstance,respectively.The adhesion and friction experiments were mainly conducted with a lateral force microscope(LFM)for the GeSb 2 Te 4 thin films before and after annealing.Their morphology and phase structure were analyzed by using atomic force microscopy(AFM)and X-ray Diffraction(XRD)techniques,and the nanoindention was employed to evaluate their hardness values.Moreover,an electric force microscope(EFM)was used to measure the surface potential. It is found that the deposited GeSb 2 Te 4 thin film undergoes an amorphous-to-fcc and fcc-to-hex structure transition;the adhesion has a weaker dependence on the surface roughness,but a certain correlation with the surface potential of GeSb 2 Te 4 thin films.And the friction behavior of GeSb 2 Te 4 thin films follows their adhesion behavior under a lower applied load.However,such a relation is replaced by the mechanical behavior when the load is relatively higher.Moreover,the GeSb 2 Te 4 thin film annealed at 340℃presents a lubricative property.     

如何构建工程项目管理企业知识管理框架

就工程项目管理企业知识管理建设框架进行了理论的阐述，从建立支持企业知识共享、创新的平台和促进该平台运作的机制提出了知识管理中最重要的两点，指出进行企业知识管理建设对企业未来发展具有重要的影响。     

弹药包装冲击强度试验方法的改进研究

介绍一种新的弹药包装冲击强度试验方法，应用该试验方法可以防止冲击强度试验时出现与期望值相反的现象。     

Centrifugal Casting of High Speed Steel/Nodular Cast Iron Compound Roll Collar

Ｈｉｇｈ ｓｐｅｅｄｓｔｅｅｌ (ＨＳＳ) ,ｉｓｃｈａｒａｃｔｅｒｉｚｅｄｂｙｅｘ ｃｅｌｌｅｎｔｈａｒｄｎｅｓｓ ,ｗｅａｒｒｅｓｉｓｔａｎｃｅ ,ａｎｄ ｇｏｏｄｒｅｄｈａｒｄｎｅｓｓ .Ｒｅｃｅｎｔｌｙ ,ＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｈｏｔｒｏｌｌｉｎｇｒｏｌｌｓｔｏｐｒｏｄｕｃｅｓｔｒｉｐｓｏｆｇｏｏｄｓｈａｐｅａｎｄｓｍａｌｌｃｒｏｗｎｗｉｔｈｅｘｔｅｎｄｅｄｒｏｌｌｓｅｒｖｉｃｅｌｉｆｅ[1,2 ] .ＴｈｅＨＳＳｉｓａｐｐｌｉｅｄｔｏｍａｎｕｆａｃｔｕｒｅｒｏｌｌｃｏｌｌａｒｆｏｒ…     

西北江三角洲来水来沙的非线性分形特征

根据西、北江干流高要、石角及西北江三角洲网河区顶点马口、三水四个水文站的流量和含沙量资料 ,应用非线性分形原理的R S方法 ,计算西北江干流及西北江网河区顶点四个水文站的流量、含沙量的赫斯特数H和分形维数D ;探讨西、北江干流来水来沙的分形特征及西北江三角洲的分水分沙规律。结果表明 ,流量的分维数略大于含沙量的分维数 ,三水站流量及含沙量的分维数与其上游的石角站流量、含沙量的分维数相差较大 ,与思贤的分水分沙造成西北江的水沙交换有关     

Matlab在“计算机辅助电路分析”中的应用

"计算机辅助电路分析"课程,是通过计算机仿真实验来训练学生分析和解决电路问题的能力.实践证明,将Matlab软件,特别是其中的Simulink仿真模块作为电路分析工具,引入到计算机辅助电路分析课程教学中,收到了良好的教学效果.本文以二阶电路阶跃响应问题的求解为例,介绍了辅以Matlab的五种求解方法,并对这五种方法的特点进行了比较,说明了Matlab在电路分析方面的优越性.     

纳米技术在中药开发中的应用

本文综述了纳米科技与中药制剂相结合的发展，阐述了纳米中药的概念、特性，介绍了纳米中药的制备技术，另外探讨了收集纳米粒子的方法，最后，着重展望了纳米技术在中药制剂中广泛的应用前景。